Ducati Multistrada 1200 Specifications

Table of Contents

TYPE : L-Twin cylinder, 4 valve per cylinder, Desmodromic, Dual Spark, liquid cooled

DISPLACEMENT : 1198.4cc

BORE X STROKE : 106 × 67.9mm

COMPRESSION RATIO : 11.5:1

POWER : 110.3kW ( 150hp ) @ 9250rpm

TORQUE : 124.5 Nm (91.8 lb-ft) @ 7,500 rpm

FUEL INJECTION : Electronic fuel injection system, elliptical throttle bodies

EXHAUST : Stainless steel muffler with catalytic converter and 2 lambda probes, alluminium tail pipe

Standard Equipment : DSS Ducati Skyhook Suspension,DSP Ducati Safety Pack ( ABS 9ME + DTC),Riding modes, Power modes, RbW, 58 litre side luggage, heated grips and centre stand

GEARBOX : 6-speed

PRIMARY DRIVE : Straight cut gears, Ratio 1.84:1

RATIO : 1=37/15 2=30/17 3=27/20 4=24/22 5=23/24 6=22/25

FINAL DRIVE : Chain 5.30″; Front sprocket 15; Rear sprocket 40

CLUTCH : Light action, wet, multiplate clutch with hydraulic control. Self-servo action on drive, slipper action on over-run

FRAME : Tubular steel Trellis frame

FRONT SUSPENSION : 48mm fully adjustable usd forks. Electronic compression & rebound damping adjustment with Ducati Skyhook Suspension

FRONT WHEEL : 10-spoke in light alloy 3.50 x 17

FRONT TYRE : Pirelli Scorpion Trail 120/70 17”

REAR SUSPENSION : Electronic compression & rebound damping adjustment. Electronic

spring pre-load adjustment with DSS Aluminium single-sided swingarm

REAR WHEEL : 10-spoke light alloy 6.00 x 17

REAR TYRE : Pirelli Scorpion Trail 190/55 17”

FRONT WHEEL TRAVEL : 170mm (6.7in)

REAR WHEEL TRAVEL : 170mm (6.7in)

FRONT BRAKE : 2 x 320mm semi-floating discs, radially mounted Brembo callipers, 4-piston, 2-pad. ABS as standard equipment

REAR BRAKE : 245mm disc, 2-piston caliper